Paver calculator

Work out how many pavers and pallets to buy, plus bedding sand and gravel for the sub-base — with a cutting allowance.

Area
40 m²
Bedding layer (sand or sand-cement)
1.6 m³
Sub-base gravel (add about 25% before compaction)
8 m³ (about 18 t)
Edging (perimeter)
28 m
How we calculated it
  1. 40 m² × 1.05 = 42 m²
  2. 42 ÷ 10 m² = 5 pallets (rounded up)

Last updated: October 2026 · Report a calculation error

Layers under a paver patio or driveway

LayerPath / patioDriveway
Pavers6 cm (2⅜″)8 cm (3⅛″)
Bedding sand3–5 cm3–5 cm
Compacted gravel sub-base10–20 cm25–30 cm
Geotextile on clay soiloptionalrecommended

How many pavers to buy

Multiply length by width and add 3–5% for straight areas or 8–10% for curves and patterns. Pavers come on pallets — the supplier states how many m² (or sq ft) each pallet covers. Gravel loses about 25% of its volume when compacted, so order extra.

Frequently asked questions

How much slope should pavers have?

About 1–2% (1–2 cm per metre, or ⅛–¼ inch per foot) away from the house so water drains off.

How many square feet is a square metre?

1 m² = 10.76 sq ft. A 10 × 12 ft patio is 120 sq ft, or about 11.1 m².

See alsoWhole category

  1. HO-01Paint calculatorWork out how many litres of paint you need for the walls and ceiling of a room.
  2. HO-02Concrete calculatorCalculate how many cubic metres of concrete to order for a slab.
  3. HO-03Tile calculatorWork out how many tiles and boxes to buy for a floor or wall, with cutting waste.
  4. HO-04Electricity cost calculatorCalculate how much electricity an appliance uses and what it costs per day, month and year.